Carbon steel plate

Carbon steel plate is a basic iron-carbon alloy plate with carbon content ≤ 2.11%, which can be divided into low-carbon, medium-carbon and high-carbon steel plates according to the carbon content.

Stainless steel plate

Stainless steel plate is a special alloy plate added with chromium, nickel and other alloy elements in steel. Its core characteristics are excellent corrosion resistance, high temperature oxidation resistance and stable mechanical properties.

Galvanized sheet

Galvanized sheet is an anti-corrosion plate made of low-carbon steel plate as the base material, coated with a layer of metallic zinc on the surface. Through the dual effects of physical isolation and electrochemical protection of the zinc layer, the anti-rust and anti-corrosion ability of the steel is greatly improved.

Tinplate

Tinplate, commonly known as tinplate, is an ultra-thin steel plate coated with a layer of pure tin on the surface of thin low-carbon steel plate. It is non-toxic and harmless, has excellent corrosion resistance, good stamping formability and printing adaptability.

Lead Plate

Carbon steel coil

Base bare steel coil with low cost, excellent welding and stamping performance, mainly used for building structures, mechanical parts, steel pipes and general hardware fabrication.

Stainless steel coil

Alloyed with chromium and nickel, it owns outstanding corrosion resistance and high-temperature resistance, applied in chemical equipment, kitchen hardware, architectural decoration and medical devices.

Galvanized Coil

Low-carbon steel substrate coated with zinc by hot-dip or electroplating for low-cost anti-rust protection, ideal for home appliance shells, factory roofing, ventilation ducts and photovoltaic brackets.

Silicon Steel Coil

Special electrical steel with low core loss and high magnetic permeability, exclusively for manufacturing iron cores of transformers, motors and generators.

Carbon steel pipe

Basic carbon steel tube with cost-effective price, easy cutting and welding, mainly used for conventional water supply, structural supports, low-pressure fluid transmission and mechanical pipelines.

Stainless steel pipe

Alloyed with chromium and nickel, featured with acid & alkali corrosion resistance, high temperature resistance and high cleanliness, suitable for food & medical equipment, chemical corrosive medium pipelines and heating pipes.

Galvanized pipe

Carbon steel pipe coated with zinc for anti-rust, widely used in civil water supply, fire protection pipelines, greenhouse frames and outdoor low-pressure piping.

Seamless Pipe

Manufactured by hot rolling or cold drawing without welding seam, with high pressure resistance, ideal for high-pressure oil & gas pipelines, boiler tubes and hydraulic systems.

Welded Pipe

Rolled and welded from steel strips, mass-produced with competitive price, for low-pressure water delivery, ventilation pipes and building guardrails.

Oil country tubular goods

Special tubing for oil & gas exploitation, with high strength, pressure and corrosion resistance, dedicated to oilfield drilling and underground oil & gas transportation.

Steel Hollow Section

Square & rectangular hollow tubes, mainly for load-bearing construction structures such as factory frames, curtain walls and safety fences.

Ductile Iron Pipe

High-toughness cast iron pipe, resistant to ground settlement and soil corrosion, primarily used for large municipal water supply and sewage pipelines.

Carbon Steel Round Bar

Basic solid carbon steel rod with low cost and stable mechanical properties, easy for forging and cutting. It is widely used for general mechanical accessories, anchor bolts, hardware components and mold blanks.

Stainless Steel Round Bar

Solid alloy rod containing chromium and nickel, featuring excellent anti-rust, acid & alkali resistance and high temperature resistance with smooth surface. It fits food equipment, medical devices, chemical anti-corrosion parts and decorative components.

Galvanized Rods

Carbon steel rods coated with hot-dip zinc layer for long-term rust prevention. Mainly applied in building lightning grounding, outdoor guardrails, greenhouse frames and outdoor embedded fasteners.

Steel Beam

Steel beam is hot-rolled structural section specially for load-bearing. With optimized cross-section, it owns outstanding bending resistance and load capacity, serving as the core load-bearing component of steel structure projects, widely used in factories, high-rise buildings, bridges, stadiums and equipment supports. It includes two subcategories.

Channel steel

U-shaped grooved section steel with good lateral bending resistance, widely used for secondary frames of steel columns, equipment bases, curtain wall keels, pipe supports and factory purlins.

Angle iron

L-shaped right-angle steel that bears force on two sides. It is the most common connecting & reinforcing material for steel structure splicing, guardrails, transmission towers and equipment frames, including equal & unequal angle types.

Flat Steel / Square Steel

Flat steel is rectangular flat strip steel, while square steel is solid square-section bar. Both are easy to cut and bend, applied for embedded parts, mechanical fittings, fences, tool blanks and steel structure reinforcing strips.

Steel Rebar

High-strength deformed steel bar with spiral ribs on surface. The ribs enable tight bonding with concrete to improve tensile and seismic performance of buildings. It acts as the main reinforcement for high-rises, bridges, tunnels and dams.

Carbon steel strip

Basic low-carbon narrow strip with low cost and good ductility, used for steel packing straps, general stamped hardware, welded pipe substrates and furniture metal fittings.

Stainless steel strip

Chromium-nickel alloy narrow strip with corrosion resistance and smooth surface, widely applied in precision electronic shrapnel, kitchenware parts, medical devices and decorative stamped

Galvanized Strip

Zinc-coated carbon steel strip with strong anti-rust performance, mainly used as substrate for color coated steel, ventilation ducts, small outdoor hardware and photovoltaic fasteners.

PPGI Coil

Pre-painted galvanized iron coil based on hot-dip galvanized steel. It features cost-effective price and standard anti-corrosion performance, the primary material for factory roofs, prefab houses and general household appliance casings.

PPGL Coil

Pre-painted galvalume coil with aluminum-zinc alloy substrate. It has superior salt spray resistance and UV resistance with much longer service life, suitable for coastal high-corrosion areas and long-term outdoor exposure.

Coated Aluminum Coil

Painted aluminum coil with light weight and zero rust risk, excellent ductility. Mainly applied for building curtain walls, aluminum-magnesium-manganese roofing, ceiling decoration and signage billboards.

Wire Rod

Smooth round coiled hot-rolled wire with excellent ductility. It can be cold-drawn into fine steel wire, nails, welding wires, fasteners and steel cables, applied in hardware products, wire mesh, welding consumables and prestressed steel strand production.

Flat Wire

Flat steel wire is a type of shaped steel wire with a flat cross-section, manufactured from hot-rolled wire rod through processes such as cold drawing and flat-roll rolling. It is characterized by a high width-to-thickness ratio and high dimensional precision, with manufacturing tolerances reaching ±0.2 mm. The production process involves steps such as pay-off, straightening, rolling, degreasing, and take-up; it utilizes a two-roll mill for multi-pass rolling, with properties optimized through annealing and final heat treatment.

Prestressed Steel Wire

Prestressed steel wire: A single high-strength steel wire produced from high-carbon steel wire rod (typically SWRS82B) through pickling, phosphating, cold drawing, and stress-relief stabilization treatment; it is used in prestressed concrete to apply a tensile force that counteracts concrete tensile stress and inhibits cracking.

Galvanized Steel Wire

Galvanized steel wire is produced from carbon steel rod, drawn and coated with zinc layer by hot-dip galvanizing or electro-galvanizing process. The zinc coating provides anti-corrosion protection for steel substrate. High carbon galvanized steel wire features high tensile strength, widely used for overhead ground wire, bridge cables, wire rope, prestressing projects in coastal and humid environment. Hot-dip type owns thicker zinc coating and longer service life under harsh conditions.

Aluminum Plate

Flat aluminum sheet with full thickness options, available for anodizing and coating. Applied for curtain wall panels, equipment housings, molds, vehicle body sheets and decorative boards.

Aluminum Coil

Wide coiled aluminum strip, which can be slitted and flattened into plates or strips, for roof waterproofing, pre-painted substrate, stamped hardware and thermal insulation cladding.

Aluminum Pipe

Hollow aluminum profile with fast heat conduction and corrosion resistance, used for air conditioning refrigeration pipelines, fluid transmission, mechanical frames and new energy heat dissipation systems.

Aluminum Bar

Solid round/square aluminum bar, can be turned and forged into precision parts, main raw material for mechanical fittings, fasteners and mold blanks.

Aluminum Foil

Ultra-thin aluminum coil with excellent water & light barrier performance, commonly used in food packaging, lithium batteries, air conditioner heat dissipation and thermal insulation.

Aluminum Section Steel

Extruded special-shaped aluminum profiles such as window & door frames, industrial frames and photovoltaic brackets, ideal for lightweight load-bearing structures.

Aluminum Tread Plate

Copper Sheet

Flat pure copper sheet with outstanding conductivity and heat transfer capacity, bendable and stampable, used for conductive substrates, heat sinks, decorative panels and battery conductive parts.

Bronze Plate

Tin-copper alloy plate with high wear resistance and corrosion resistance, applied for bearing liners, mechanical wear-resistant fittings, anti-corrosion chemical plates and valve components.

Copper Tube

Hollow pure copper pipe with heat conduction, antibacterial, pressure and corrosion resistance, widely used in air conditioning refrigeration pipelines, plumbing, oil & gas delivery and heat exchange equipment.

Copper Rod

Alloy solid copper bar with good cutting and forging performance, to produce bearings, gears, hardware fasteners and mechanical wear-resistant parts.

Purple Copper Rod

High-purity electrolytic copper solid bar with maximum electrical & thermal conductivity, dedicated to busbars, electrodes, conductive connectors and precision electronic components.

Scrap Copper Wire

Recycled waste copper wire, can be remelted to regenerate copper raw materials for circular economy and cost reduction.

Copper Coils

Copper coils are coiled copper materials made from high-purity copper billets through hot rolling, cold rolling, and finishing rolling. They possess excellent electrical and thermal conductivity, good ductility, and resistance to atmospheric corrosion.

Flange

Flanges are core detachable connection components in piping systems, also known as flange plates, primarily used to achieve sealed connections between pipes, valves, and pressure vessels.

Elbow

Elbows are basic pipe fittings used in piping systems to change the direction of fluid transport. Common angles include 45°, 90°, and 180°, and they are available in long-radius and short-radius structures.

Cap

Pipe caps, also known as end caps or plugs, primarily function to seal the end ports of pipelines, blocking fluid flow and protecting the pipe threads and bevels from corrosion.

Three-way

Three-way tees are key pipe fittings for branching and merging pipelines. They are divided into equal-diameter tees and reducing tees, and their structures include T-type and Y-type.

Tube Sheet

Tube sheets are core components inside heat exchangers, condensers, and pressure vessels, primarily used to fix the heat exchange tube bundles and separate the shell-side and tube-side media.

Pipe Fitting

Pipe fittings refer to all kinds of connecting fittings for a complete piping system, including elbows, tees, caps, reducers, branch fittings, unions, and other pipeline components.